Iso 1161 Pdf Free Download

Model	Capacity (lbs.)	Max Speed (MPH)	Type Of Wheels	Number Of Wheels	Inflation PSI	A	B	C	D	E	F	G	Weight (lbs.)	In Stock	Price*	Buy Online
AC49000A-2PA Container Caster	2,500	5	Urethane on Iron	1	N/A	19.10 inches	15.47 inches	8 inches	2 inches	2 inches	3 inches	10.25 inches	73.60	Yes	$1,280.14
AC49000A-3PA Container Caster	5,000	5	Urethane on Iron	1	N/A	21.59 inches	17.96 inches	10 inches	2.63 inches	3.63 inches	5 inches	12 inches	126	Yes	$2,359.16
AC49000A-4PA Container Caster	10,000	5	Urethane on Iron	2	N/A	22.59 inches	18.96 inches	10 inches	2.5 inches	3.5 inches	5 inches	14.25 inches	222.25	Yes	$3,000.27
AC49000A-5PA Container Caster	12,000	5	Urethane on Iron	2	N/A	24.59 inches	20.96 inches	12 inches	2.88 inches	4.88 inches	5 inches	14.25 inches	241.25	Yes	$3,380.82
AC49000A-6PA Container Caster	16,800	5	Urethane on Iron	2	N/A	28.59 inches	24.96 inches	16 inches	3.56 inches	7.56 inches	5 inches	14.25 inches	292.25	Yes	$3,905.69
AC49000A-7PA Container Caster	3,120	5	Pneumatic	2	85	30.59 inches	26.96 inches	18 inches	4.5 inches	9.5 inches	6 inches	12 inches	112	Yes	$2,330.98
AC49000A-8PA Container Caster	5,550	5	Pneumatic	2	115	35.34 inches	31.71 inches	23 inches	5 inches	12.5 inches	7.25 inches	14.25 inches	203	Yes	$4,409.13
AC49000A-9PA Container Caster	7,260	5	Pneumatic	2	100	37.84 inches	34.21 inches	25 inches	5 inches	13.5 inches	7.75 inches	14.25 inches	239	Yes	$6,807.25
AC49000A-10PA Container Caster	9,460	6	Pneumatic	2	130	37.59 inches	33.96 inches	23.54 inches	5 inches	12.77 inches	7.13 inches	12 inches	294	Yes	--	Register For Quote
AC49000A-11PA Container Caster	15,000	6	Pneumatic	2	145	38.59 inches	34.96 inches	23.62 inches	6 inches	13.81 inches	9.84 inches	14.25 inches	524	Yes	--	Register For Quote
AC49000A-12PA Container Caster	18,000	5	Urethane on Iron	2	N/A	32.59 inches	28.96 inches	20 inches	4.31 inches	10.31 inches	5 inches	14.25 inches	347	Yes	$6,531.10
AC49000A-13PA Container Caster	10,000	5	Nylatron HD	1	N/A	17.63 inches	14 inches	6 inches	1.75 inches	.75 inches	3 inches	12 inches	70	No	--	Register For Quote

* Price is per caster.

Installing into standard ISO containers with ISO 1161 corner fittings at corners

• Lift container per international standard (ISO) 3874 or other means so that the bottom surface of the corner fittings are about 40" above the rolling surface.
• With a fork lift truck raise the unlocked Casterloc into the bottom hole of each corner fitting & activate the twist lock with its handle. Before lowering the container, adjust the clamping stud to tighten connection ( 50 to 125 ft/ lb.) Notice - tightening must be done before lowering.
• When all four Casterlocs are tight, lower the container to the level rolling surface.
• The container may be raised a second time & retightened to the same torque after "settling", if desired.

Operation

• Moving standard freight containers on casters differs from moving containers on a chassis because the caster connection has less horizontal structural strength. For this reason, the speed of movement must be slower and the surface on which the caster rolls, must be reasonably smooth. Excessive forces in a horizontal direction can cause failure. For this reason, speed shall not exceed the limit shown for each caster.
• Moving heavy containers on casters requires that its movement always be under control for direction and braking on both level and unlevel surfaces. A towing vehicle with tow bars affixed to the forward bottom corners is the optimum method of moving & braking. Personnel should remain clear of the roll path to prevent injury. Sufficient personnel should be utilized for good visibility.

Important Note

• Lifting and handling ISO freight containers should be done by qualified personnel familiar with ISO standard 3874. This standard is available from the International Standards Organization (in the U.S.A.; American National Standards Institute (ANSI)).

Posted by: valrieokuniewskissa.blogspot.com

Source: https://www.tandemloc.com/ac49000a-series